Condensers

Products

View All

CONDENSERS

We have been working side by side with customers for nearly 25 years fabricating custom glassware to suit their needs. Whether it is a completely custom item or a custom modification to an existing catalog item we are happy to accommodate you. Just provide us with a blueprint or even a simple hand drawing will do and we are happy to help.

25 years of Experience

Large Inventory of Stock

Hight Quality Equipment

National Shipping

C-6048 Allihn Condenser

With plain 12mm tube on top and 24/40 drip joint on the bottom. Effective length is the length of the jacketed section, 1/4" hose barbs on top and bottom.

C-6049 Allihn Condenser, Full Jacket

he condenser is jacketed the entire length, with 24/40 outer on top and bottom and 1/4" hose barbs for coolant.

C-6050 Allihn Condenser

With outer joint on top and inner on bottom, effective length is the length of the jacket, 1/4" hose barbs.

C-6051 Coil Condenser

Coils connect to the hose barbs, outer joint on top and inner drip joint on bottom, 1/4" hose barbs.

C-6052 Coil Condenser, Jacketed

Column is double jacketed for maximum efficiency. Coolant comes in contact from the inside with the coil and the outside via the jacket.

C-6053 Cold Finger

With outer joint on top and inner on bottom, effective length is the length of the jacket, 1/4" hose barbs.

C-6054 Cold Finger

With 45mm outer jacket and plain 1/2" tube on top and 45/50 inner on bottom inner coil runs from the top to just above the 45/50 inner.

C-6055 Dewar

Simple inexpensive Dewar condenser with plain 14mm tube bent 90 degree up and 24/40 drip joint on the bottom.

C-6056 Dewar

Dewar condenser with 24/40 outer on top bent at 75 degree angle, and 24/40 drip joint on the bottom.

C-6057 Friedrichs

Tightly inserted molded spiral condensing finger, plain 25mm tube on top and 1/4 hose barbs bent 90 degree, inner drip joint on the bottom.

C-6058 Friedrichs

Molded spiral condensing finger with outer joint on top and 1/4" hose barbs bent at 90 degree.

C-6059 Graham Condenser

Outer joint on top and drip joint on the bottom connected between with 8mm coil and 1/4" hose barbs on top and bottom for coolant.

C-6060 Graham condenser

Similar to C-6059 but with 24/40 outer joint on top and plain 1/2" drip tube on the bottom.

C-6061 Liebig Condenser

With outer joint on top and drip joint on the bottom connected by 1/2" tube. Outer jacket is 41mm with 1/4" hose barbs on both ends.

C-6062 Liebig Condenser

Full jacket Liebig condenser, inner 1/2" tube extends all the way to the end of the inner joint on bottom, 1/4" hose barbs and 24/40 joints.

C-6063 West Condenser

Full jacket Liebig condenser, inner 1/2" tube extends all the way to the end of the inner joint on bottom, 1/4" hose barbs and 24/40 joints
Price: $89.25

CUSTOM ORDERS

North Jersey Custom Glass has over 25 years of experience in the scientific glassblowing industry, so just give us a call, and we can help you with your next order.

REPAIRS

Repairs are given the same attention to detail as new items. At North Jersey Custom Glass, it is always our goal to have the repair leave the shop looking as close to new as possible.

ABOUT US

Our name says it all. Whether it is a completely customized order or a modification to a standard catalog item, North Jersey Custom Glass has you covered.

CONTACT US

Give us a call at 973-764-8896 or email us at jason@njcustomglassllc.com.